WOODBRIDGE 72-Inch Freestanding Acrylic Bathtub Review: Extra-Wide Rim, Deep Soaking Comfort, and Brushed Gold Details

A large freestanding bathtub can become the centerpiece of a primary bathroom, but size alone does not determine whether a tub is comfortable or practical. Interior dimensions, rim design, water depth, heat retention, faucet placement, and installation access all matter just as much as exterior length.

The WOODBRIDGE 72-inch freestanding acrylic bathtub is designed for homeowners who want a spacious soaking tub with a clean contemporary profile and brushed-gold hardware. It combines a 72-inch exterior length, 69-gallon effective capacity, 14.5-inch water depth to the overflow, double-wall acrylic construction, and an unusually wide rim that can hold bath essentials or potentially support a deck-mounted tub filler.

That wide rim is one of the features that separates this model from many sculpted freestanding tubs. It gives the bath a more functional edge surface, but it also introduces an important installation consideration: faucet holes are not pre-drilled, so anyone planning a deck-mounted filler must measure and drill the tub carefully during installation.

What Is the WOODBRIDGE 72-Inch Freestanding Bathtub?

This is a large white acrylic soaking tub with brushed-gold drain and overflow hardware.

According to the supplied specifications, the exterior dimensions are approximately 72 inches long, 35-3/8 inches wide, and 22-7/8 inches high.

The listed internal basin dimensions are approximately 51-5/8 inches long by 21-1/4 inches wide, while water depth to the overflow is about 14-1/2 inches.

The stated effective water capacity is 69 gallons.

The tub uses high-gloss LUCITE acrylic reinforced with resin and fiberglass, while a metal support structure underneath is rated by the manufacturer for loads of up to 1,000 pounds.

A Large 72-Inch Footprint

At six feet long, this bathtub is firmly in the large freestanding category.

That extra length can provide more visual presence and potentially more comfortable legroom than compact 55- or 59-inch soaking tubs.

It can be a strong fit for:

• Large primary bathrooms
• Spa-inspired renovations
• Taller bathers
• Rooms where the tub is intended as a focal point

However, the larger footprint demands more careful planning.

Exterior Size vs. Interior Bathing Space

The tub is 72 inches long externally, but the listed interior length is approximately 51-5/8 inches.

That difference is normal for sculpted freestanding tubs.

Space is consumed by:

• Sloped walls
• Double-wall construction
• Structural shell
• Rim thickness

When comparing tubs, interior dimensions are therefore more useful for judging actual bathing comfort than exterior length alone.

Interior Width

The stated internal width is approximately 21-1/4 inches.

That provides a relatively generous basin compared with many narrower freestanding tubs.

Still, larger users should compare this dimension with an existing bathtub they already find comfortable.

14.5-Inch Water Depth

The water depth to the overflow is listed at approximately 14.5 inches.

This is an important specification because it indicates how much of the body can actually be submerged.

A deeper waterline can make the tub feel more immersive even when the overall rim height is moderate.

69-Gallon Effective Capacity

The stated effective capacity is approximately 69 gallons.

That is a substantial volume of water.

Actual consumption during a bath will generally be somewhat lower because the bather displaces water, but the tub still requires significant hot-water availability.

Check Your Water Heater Capacity

Before buying a 69-gallon soaking tub, consider whether the home's hot-water system can comfortably fill it.

A small conventional tank heater may struggle to provide enough hot water for a deep bath, especially if other fixtures are being used at the same time.

Evaluate:

• Water-heater capacity
• Recovery rate
• Desired bath temperature
• Simultaneous household demand

This is one of the most commonly overlooked issues when upgrading to a large soaking tub.

Extra-Wide Rim

The extra-wide rim is one of this model's defining features.

It gives users a flat surface for practical items such as:

• Soap
• Towels
• Bath accessories

That may sound minor, but many modern freestanding tubs use thin sculpted edges that provide almost no usable surface.

More Practical Than a Narrow-Rim Tub

A wider edge makes the bathtub more functional during everyday use.

It can provide space for items you would otherwise need to place on:

• A nearby stool
• A bath caddy
• The floor

That can make the bathing area feel less cluttered.

Deck-Mount Faucet Compatibility

The wide rim can also potentially accommodate a deck-mounted tub filler.

This is an unusual advantage for a freestanding bathtub.

Many freestanding tubs require a separate:

• Floor-mounted filler
• Wall-mounted faucet

A deck-mounted option can simplify the visual layout in some bathrooms.

Faucet Holes Are Not Pre-Drilled

This is a critical installation detail.

According to the supplied description, the installer must measure and drill the faucet mounting holes.

That means the tub should not be treated like a factory-pre-drilled deck-mount model.

Drilling acrylic requires careful planning and proper tools.

Why Faucet Drilling Requires Precision

Incorrect drilling can cause:

• Cracking
• Chipping
• Misaligned fixtures
• Permanent cosmetic damage

The faucet layout also needs enough clearance underneath for:

• Supply lines
• Mounting hardware
• Connections

If you plan to use a deck-mounted faucet, have the exact faucet in hand before drilling the bathtub.

Floor-Mounted Faucet Is Still an Option

You do not have to use the wide rim for a deck-mounted filler.

A floor-mounted tub filler can preserve the clean rim and create a more traditional freestanding appearance.

That option may make more sense if the bathroom plumbing has already been designed for floor-mounted supplies.

Wall-Mounted Faucet

A wall-mounted filler may also work if the tub sits close enough to a wall.

The key factor is spout reach.

The water stream needs to land comfortably inside the basin without striking the rim or splashing outside.

Brushed Gold Drain and Overflow

This version includes a solid brass brushed-gold drain and a stainless-steel brushed-gold overflow.

The warm metallic finish can give the tub a more decorative and upscale look than conventional chrome hardware.

It pairs particularly well with bathrooms using:

• Brushed-gold faucets
• Brass cabinet pulls
• Warm metallic lighting
• Cream or marble finishes
• Dark wood cabinetry

Matching Brushed-Gold Finishes

Gold-tone bathroom finishes can vary considerably between manufacturers.

One brand's brushed gold may appear:

• More yellow
• More champagne
• More bronze

than another.

If exact coordination matters, compare finish samples rather than assuming all brushed-gold fixtures will match perfectly.

Contemporary Styling

The tub uses a clean, modern silhouette with gently sloping lines.

Its shape is designed to feel elegant without becoming overly decorative.

That makes it versatile enough for several bathroom styles, including:

• Modern
• Transitional
• Luxury contemporary
• Spa-inspired

The brushed-gold trim adds warmth to what would otherwise be a very neutral white fixture.

Sloped Interior for Reclined Soaking

The tub walls slope gently rather than rising vertically.

This allows the body to recline more naturally.

For long baths, back angle can have a greater impact on comfort than a few extra inches of exterior length.

Who Benefits Most From the Large Size?

The 72-inch format is especially attractive for taller bathers or anyone who dislikes feeling confined in smaller tubs.

However, the internal dimensions should still be checked carefully.

A sculpted 72-inch tub does not provide 72 inches of flat interior legroom.

Double-Wall Construction

The bathtub uses a double-wall acrylic design.

This is intended to improve structural rigidity and slow heat transfer from the bathwater to the surrounding room.

Better insulation can help the water remain comfortable longer during extended soaking.

Heat Retention and Long Baths

A larger tub contains more water and therefore takes longer to fill.

Once filled, maintaining temperature becomes important.

The double-wall design can help reduce heat loss, though it does not actively heat the water.

If you want active temperature maintenance, you would need a tub specifically equipped with an inline heater.

High-Gloss LUCITE Acrylic

The shell is made from high-gloss LUCITE acrylic.

Acrylic is popular for freestanding tubs because it offers a useful combination of:

• Lower weight
• Smooth finish
• Moldability
• Easy maintenance

It can create complex curved shapes without the extreme weight of cast iron or stone.

Fiberglass and Resin Reinforcement

The acrylic is reinforced with fiberglass and resin.

That reinforcement helps increase rigidity and support the shell during use.

It also helps the bathtub maintain its shape despite the substantial water load.

Metal Support Bracket

The manufacturer states that the support structure can handle up to 1,000 pounds.

That is a product specification for the tub itself.

The bathroom floor still needs to support the combined weight of:

• Tub
• Water
• Bather

especially when the bath is installed on an upper level.

Filled Weight Matters

Sixty-nine gallons of water alone weighs well over 500 pounds.

Once the tub and bather are included, total floor load can become substantial.

Most properly constructed modern bathroom floors may handle this type of fixture, but older or unusual structures should be evaluated during renovation planning.

Non-Slip Tub Floor

The manufacturer states that the tub's slip-resistant design meets applicable ASTM slip-resistance standards.

That can improve footing when entering and exiting.

This is especially valuable in a large soaking tub where users may need to step over a relatively high rim.

Slip Resistance Is Only One Safety Layer

No bathtub surface can eliminate fall risk completely.

Also consider:

• Non-slip bathroom flooring
• Adequate lighting
• Grab bars where appropriate
• Clear access around the tub

For users with mobility limitations, entry height should be evaluated carefully before purchase.

Easy-Care Surface

The manufacturer describes the finish as resistant to stains and scratches and designed to retain its gloss.

Acrylic is generally straightforward to maintain when cleaned regularly.

Use mild, non-abrasive products unless the manufacturer specifies otherwise.

Avoid Abrasive Cleaning Tools

Do not use aggressive materials such as:

• Steel wool
• Coarse scrub pads
• Harsh abrasive powders

on acrylic unless specifically approved.

These can dull or scratch the glossy surface.

Hard-Water Maintenance

In areas with mineral-heavy water, deposits may form around:

• Drain
• Overflow
• Waterline

Wiping the tub regularly can prevent heavy scale from becoming difficult to remove.

Installation Planning

A freestanding bathtub installation should be planned before the final bathroom finishes are completed.

Key items include:

• Drain position
• Faucet type
• Water-supply location
• Tub clearance
• Cleaning access

Because this model can potentially use a deck-mounted filler, faucet planning is especially important.

Measure the Room With the Tub Footprint Marked

A useful technique is to mark the tub dimensions on the floor with painter's tape.

At 72 by more than 35 inches, this is a substantial fixture.

The outline helps you judge:

• Walking space
• Door clearance
• Vanity access
• Shower clearance

before the tub arrives.

Leave Cleaning Clearance

A freestanding bath may look elegant close to a wall, but cleaning behind it can become difficult.

Leave enough clearance to reach:

• Floor
• Wall
• Plumbing area

wherever possible.

Plan the Delivery Route

Before ordering, measure:

• Doorways
• Hallways
• Stairs
• Tight turns

A large tub that fits the bathroom may still be difficult to bring inside the home.

Delivery planning is particularly important for upstairs bathrooms.

Drain Alignment

The drain needs to line up accurately with the home's waste plumbing.

Freestanding tubs can be less forgiving than some alcove installations because the drain connection is hidden beneath the bath.

Use the current installation drawing rather than relying only on product-page measurements.

Professional Installation

Experienced installation is often worthwhile for a large freestanding bath, especially when:

• Deck-mounted faucet holes must be drilled
• Plumbing needs relocation
• The tub sits on an upper floor
• Floor leveling is required

A poor installation can lead to leaks, instability, or expensive damage to the tub shell.

Protect the Acrylic During Construction

If the bathtub is installed before tile or other finishing work is complete, cover it carefully.

Construction debris can scratch a glossy acrylic finish.

Do not use the tub as temporary storage for tools or building materials.

Large Freestanding Tub vs. Compact Freestanding Tub

A compact tub is easier to fit and uses less water.

The 72-inch WOODBRIDGE model offers:

• More interior space
• Greater visual impact
• Wider rim
• Higher water capacity

The tradeoff is larger room requirements and greater hot-water demand.

Acrylic vs. Cast Iron

Acrylic Advantages

Acrylic is generally:

• Lighter
• Easier to move
• Easier to mold into contemporary shapes

Cast-Iron Advantages

Cast iron is exceptionally solid and durable but much heavier.

For large freestanding installations, acrylic can be considerably easier to transport and position.

Acrylic vs. Solid Surface

Solid-surface tubs often feel heavier and more substantial and may provide excellent heat retention.

However, they can also be:

• More expensive
• Much heavier

A reinforced acrylic tub offers a more practical alternative for many residential renovations.

Who Is This Bathtub Best For?

This model makes the most sense for homeowners who want:

• A large freestanding soaking tub
• Extra interior width
• A functional wide rim
• Brushed-gold accents
• Deck-mount faucet potential
• Contemporary styling
• Double-wall acrylic construction

It is particularly well suited to spacious primary bathrooms.

Who Might Prefer a Different Tub?

A smaller or different design may be better if you need:

• Lower water use
• Easier entry
• Compact installation
• Whirlpool jets
• Built-in heater
• Accessibility-oriented features

This is primarily a large luxury soaking tub rather than a therapeutic or accessibility-focused model.

Common Buying Mistakes

Choosing Based on Exterior Length Alone

Always check interior dimensions.

Forgetting Hot-Water Demand

A 69-gallon tub requires a capable water-heating system.

Drilling Faucet Holes Without the Faucet Present

The exact fixture layout should be known first.

Ignoring Delivery Access

Large freestanding tubs can be difficult to maneuver through a finished home.

Installing Too Close to a Wall

Leave enough room for cleaning.

Assuming the Tub Actively Heats Water

Double-wall insulation helps retain heat but does not heat the bath.

Pros and Considerations

Advantages

• Large 72-inch freestanding design
• 69-gallon stated capacity
• 14.5-inch water depth
• Extra-wide functional rim
• Potential deck-mount faucet installation
• High-gloss LUCITE acrylic
• Fiberglass and resin reinforcement
• Double-wall insulation
• Metal support structure
• Slip-resistant floor
• Brushed-gold drain and overflow
• Contemporary appearance

Potential Considerations

• Requires substantial floor space
• High hot-water demand
• Deck-mount faucet holes must be drilled by the installer
• Filled tub creates significant floor load
• Large size can complicate delivery
• Not equipped with whirlpool jets or active heating

Frequently Asked Questions

What are the exterior dimensions?

Approximately 72 inches long, 35-3/8 inches wide, and 22-7/8 inches high.

What are the interior dimensions?

Approximately 51-5/8 inches long by 21-1/4 inches wide according to the supplied specifications.

How deep is the water to the overflow?

Approximately 14-1/2 inches.

What is the effective capacity?

Approximately 69 gallons.

What is the tub made from?

High-gloss LUCITE acrylic reinforced with resin and fiberglass.

Does it have double-wall insulation?

Yes. The supplied description states that the double-wall design helps retain water temperature longer.

Does it have a slip-resistant floor?

Yes. The manufacturer states that the design meets applicable ASTM slip-resistance requirements.

What finish are the drain and overflow?

Brushed gold.

Is the drain included?

Yes. The source lists a solid-brass brushed-gold drain and stainless-steel brushed-gold overflow.

Can I install a faucet on the tub rim?

Yes, the wide rim is designed to potentially accommodate a deck-mounted filler.

Are the faucet holes pre-drilled?

No. The installer must measure and drill them.

Does it include a faucet?

The supplied description does not state that a faucet is included.

How much weight can it support?

The manufacturer lists a support rating of up to 1,000 pounds.

Is it heated?

No active heater is mentioned. The double-wall construction is intended to help retain heat.

What certifications are listed?

The supplied information states compliance with CSA B45.5-17/IAPMO Z124-2017.

What warranty is included?

A one-year limited warranty against defects in materials and workmanship is listed.

Final Thoughts

The WOODBRIDGE 72-inch freestanding acrylic bathtub with brushed-gold drain and overflow is designed for homeowners who want a large, visually prominent soaking tub with more practical rim space than many sculpted freestanding designs provide.

Its strongest features are the generous dimensions, 69-gallon capacity, 14.5-inch soaking depth, double-wall insulation, reinforced acrylic construction, and extra-wide rim. The option to drill the rim for a deck-mounted tub filler also gives installers more flexibility than many freestanding tubs offer.

That flexibility comes with additional planning requirements. The large footprint needs adequate bathroom clearance, the hot-water system should be sized appropriately, and any deck-mounted faucet installation must be measured and drilled carefully.

For buyers looking for a 72-inch white freestanding acrylic soaking bathtub with a wide rim, deep basin, brushed-gold hardware, double-wall insulation, and optional deck-mount faucet capability, this WOODBRIDGE model offers a strong combination of luxury styling and practical bathroom functionality.