WOODBRIDGE 67-Inch Freestanding Bathtub Review: Deep Acrylic Soaking Tub With Matte Black Drain

A freestanding bathtub can become the visual centerpiece of a bathroom, but a good tub needs to do more than look impressive. Comfort, soaking depth, insulation, structural support, surface maintenance, and plumbing compatibility all matter once the tub becomes part of daily use.

The WOODBRIDGE 67-inch acrylic freestanding bathtub is designed for homeowners who want a large contemporary soaking tub with a clean white finish and contrasting matte black drain hardware. Its curved profile, 14.75-inch water depth, 64-gallon effective capacity, double-wall construction, and reinforced acrylic shell make it a substantial fixture intended for long soaking sessions rather than quick baths.

At 67 inches long and 31.5 inches wide, this is not a compact tub. It is better suited to primary bathrooms with enough space to accommodate a true freestanding fixture and the plumbing access it requires. For buyers planning a larger bathroom remodel, however, the combination of deep soaking dimensions and relatively lightweight acrylic construction can be appealing.

WOODBRIDGE 67-Inch Freestanding Tub at a Glance

The supplied specifications include:

• 67-inch overall length
• 31.5-inch overall width
• 23.625-inch height
• 45.25-inch internal length
• 19.625-inch internal width
• 14.75-inch water depth to overflow
• 64-gallon effective capacity
• High-gloss white LUCITE acrylic
• Fiberglass and resin reinforcement
• Double-wall construction
• Slip-resistant interior
• Matte black pop-up drain
• Matte black overflow cover
• Metal support frame
• Maximum listed load capacity of 1,000 pounds

This is a large soaking tub aimed at users who value depth and reclining comfort.

Large 67-Inch Size for a More Spacious Soak

A 67-inch tub provides noticeably more exterior length than the common 59- or 60-inch freestanding format.

That extra space can matter for taller adults or anyone who prefers to recline rather than sit more upright.

The interior dimensions are listed at approximately:

45.25 inches long x 19.625 inches wide

Those measurements are particularly important because the exterior length alone does not tell you how much usable room exists inside the tub.

Exterior Size vs. Interior Size

Freestanding tubs have relatively thick walls and sloped ends, so the usable interior is always smaller than the exterior dimensions.

When deciding whether the tub will be comfortable, consider:

• Your height
• Leg position
• Shoulder width
• Backrest angle
• Preferred soaking posture

A 67-inch exterior does not necessarily mean a 67-inch reclining surface.

14.75-Inch Soaking Depth

The water depth to the overflow is approximately 14-3/4 inches.

That makes this a genuine soaking-oriented tub rather than a shallow bathing fixture.

A deeper waterline allows more of the body to remain submerged, particularly around the:

• Hips
• Legs
• Lower torso

This can create a more immersive bath experience.

Why Soaking Depth Matters More Than Overall Height

The tub's overall height is approximately 23.6 inches, but not all of that height can be filled with water.

The overflow establishes the practical maximum waterline.

For buyers comparing soaking tubs, the water depth to overflow is usually a more useful specification than the outside height.

64-Gallon Effective Capacity

The effective capacity is listed at approximately 64 gallons.

That is a substantial amount of water.

In real use, you will generally fill the tub with less because a person's body displaces part of the water volume.

Even so, the capacity has practical implications.

Before purchase, think about:

• Water-heater capacity
• Fill time
• Water usage
• Floor loading

Check Your Water Heater Before Buying

A large soaking tub can use much more hot water than a conventional alcove bath.

If your home has a smaller tank-style water heater, it may not be able to fill the tub to the desired temperature in one uninterrupted cycle.

Consider:

• Tank size
• Household hot-water demand
• Incoming water temperature
• Faucet flow rate

Tankless systems should be evaluated based on their flow capacity and temperature rise.

Curved Contemporary Design

The tub uses a curved shape on both ends.

This has both aesthetic and ergonomic advantages.

Visually, the softer profile creates fewer hard edges and can make the fixture look more sculptural.

Functionally, the gently sloped ends are intended to provide more natural back support during soaking.

Double-Ended Comfort

A curved tub with similar slopes on both ends can be more flexible than a traditional single-sloped design.

Depending on drain placement and interior shape, users may be able to recline comfortably from either side.

That can also make the tub feel more balanced when centered in a room.

Modern Matte Black Accents

The tub itself is high-gloss white, while the included overflow cover and pop-up drain use a matte black finish.

This high-contrast combination works well with bathrooms featuring:

• Matte black faucets
• Black shower frames
• Black cabinet hardware
• White tile
• Marble-look finishes

For a coordinated bathroom, it makes sense to match the tub filler and nearby accessories to the same general hardware finish.

LUCITE Acrylic Construction

The bathtub is made from LUCITE acrylic reinforced with ASHLAND resin and fiberglass, according to the supplied specifications.

Acrylic is widely used for freestanding tubs because it offers a useful combination of:

• Lower weight
• Smooth appearance
• Warm surface feel
• Flexible design possibilities
• Easier handling than cast iron

The reinforcing layers help improve rigidity and long-term durability.

Acrylic vs. Cast Iron

Acrylic and cast iron create very different installation experiences.

Acrylic Advantages

• Lower weight
• Easier transport
• Easier installation
• Warm initial surface
• Modern sculpted forms

Cast-Iron Advantages

• Extremely durable
• Excellent rigidity
• Strong heat retention
• Premium traditional feel

For an upstairs bathroom or renovation where weight matters, acrylic is often easier to work with.

Fiberglass Reinforcement

Acrylic by itself can flex.

Fiberglass and resin reinforcement help strengthen the shell and provide structural support.

That is particularly important in a large tub, where the body must resist movement under the combined weight of:

• Water
• Bather
• Tub itself

Metal Support Structure

The source states that the bathtub uses a metal bracket or support system rated for up to 1,000 pounds.

That is useful, but the specification should not be confused with the floor's structural capacity.

The bathroom floor must independently support the complete installed load.

Floor Loading Should Not Be Ignored

Water is heavy.

A tub containing dozens of gallons plus a bather creates a substantial concentrated load.

In most modern homes this may not present a problem, but structural verification can be worthwhile when installing:

• On an upper floor
• In an older house
• Over modified framing
• Near previously damaged flooring

A contractor or structural professional can evaluate questionable conditions.

Double-Wall Construction and Heat Retention

The tub uses a double-wall design intended to improve thermal insulation.

This reduces heat transfer through the tub shell compared with a thin single-wall construction.

It may help bathwater remain warm longer, although the actual rate of cooling depends on many factors, including:

• Room temperature
• Fill temperature
• Water volume
• Ventilation
• Surface exposure

The source does not provide measured thermal-performance data, so no exact heat-retention time should be assumed.

Slip-Resistant Interior

The tub includes a slip-resistant bottom that the manufacturer states meets applicable ASTM slip-resistance standards.

A textured or treated bottom can provide better traction when stepping into or out of a wet tub.

This is especially important because freestanding soaking tubs often have higher sides than standard alcove tubs.

Slip Resistance Does Not Eliminate Risk

No bathtub surface is completely slip-proof.

Users should still:

• Step carefully
• Keep soap residue under control
• Consider grab bars where appropriate
• Avoid standing unnecessarily in a deep soaking tub

Accessibility and mobility needs should be considered separately from the manufacturer's slip-resistance claim.

Easy-Clean Acrylic Surface

WOODBRIDGE markets the finish under its Enduraclean terminology.

The surface is described as:

• Stain resistant
• Scratch resistant
• Easy to maintain
• High gloss

For routine cleaning, acrylic usually requires gentler products than some porcelain surfaces.

Use:

• Mild bathroom cleaner
• Warm water
• Soft sponge
• Microfiber cloth

Avoid Abrasive Cleaners

Acrylic can scratch if cleaned aggressively.

Avoid:

• Steel wool
• Rough scouring pads
• Abrasive powders
• Strong solvents unless specifically approved for acrylic

Preserving the glossy surface makes routine cleaning easier over the long term.

Matte Black Pop-Up Drain Included

The package includes a solid-brass matte black pop-up drain.

Including the drain is useful because the finish already matches the overflow cover.

It also removes one compatibility decision from the installation process.

Still, the drain connection below the tub must be compatible with the home's waste plumbing.

Stainless Steel Overflow Cover

The overflow cover is described as stainless steel with a matte black finish.

The overflow allows excess water to enter the waste system before it reaches the top rim of the tub.

Like any overflow, it reduces the risk of accidental spills but does not guarantee the bathroom cannot flood if water enters faster than the drainage system can handle.

Faucet Is Not Listed as Included

The supplied package description lists the tub, drain, overflow, manual, and installation instructions.

A tub filler is not listed.

That means buyers need to plan the faucet separately.

Common options include:

• Floor-mounted freestanding tub filler
• Wall-mounted tub filler
• Deck-mounted faucet where appropriate

Choosing a Floor-Mounted Tub Filler

A floor-mounted faucet is a popular pairing with freestanding tubs because it preserves the sculptural appearance.

However, it requires:

• Floor plumbing
• Secure anchoring
• Proper spout reach
• Adequate clearance

The filler should be placed where it does not interfere with entry into the tub.

Wall-Mounted Tub Fillers

A wall-mounted filler can save floor space and create a cleaner installation.

The most important specification is spout reach.

The spout must extend far enough to clear the rim and discharge water safely into the basin.

Fill Rate Matters With a 64-Gallon Tub

A large tub can take a long time to fill through a low-flow fixture.

For example, the practical fill time depends directly on the faucet's gallons-per-minute output.

When choosing a tub filler, consider both:

• Aesthetic design
• Flow capacity

A beautiful but low-flow faucet can make filling a large soaking tub frustrating.

Installation Planning

Freestanding tubs should be planned before finish work is complete whenever possible.

Important details include:

• Drain position
• Faucet location
• Electrical requirements, if any nearby
• Floor level
• Structural support
• Cleaning clearance

Although the tub is freestanding, the plumbing connection underneath still requires careful alignment.

Level the Tub Correctly

A freestanding bathtub must sit level and stable.

An uneven tub can create problems with:

• Drainage
• Rocking
• Seal integrity
• User comfort

Adjustable feet or leveling hardware should be configured according to the manufacturer's instructions.

Leave Enough Cleaning Clearance

One of the advantages of a freestanding tub is visual openness, but pushing it too close to a wall can create an inaccessible cleaning gap.

Consider whether you can realistically reach behind and around the tub after installation.

A few extra inches of clearance can make maintenance easier.

Does a 67-Inch Tub Fit a Small Bathroom?

Usually not.

Although the design may be space-efficient relative to some larger tubs, a 67-inch fixture still requires substantial room.

Before purchase, mark out the full dimensions on the floor:

67 x 31.5 inches

Then account for:

• Faucet clearance
• Walking space
• Vanity doors
• Shower doors
• Toilet clearance

Floor tape is an easy way to visualize the final footprint.

Freestanding Tub vs. Alcove Tub

Freestanding Tub Advantages

• Strong visual impact
• Deep soaking
• Flexible placement
• Spa-like appearance

Alcove Tub Advantages

• More efficient use of wall space
• Easier shower integration
• Usually lower installation complexity

A freestanding soaking tub is best when bathing comfort and design take priority over maximizing floor efficiency.

Freestanding Tub vs. Whirlpool Tub

This WOODBRIDGE model is a soaking tub, not a jetted system.

That means it avoids:

• Pumps
• Jets
• Electrical components
• Internal circulation plumbing

A standard soaking tub is usually simpler to clean and maintain than a whirlpool tub.

Buyers who want hydrotherapy jets should consider a different model.

Common Buying Mistakes

Measuring Only the Exterior Length

Check width, interior dimensions, and room clearance too.

Forgetting About Hot-Water Capacity

A 64-gallon tub can demand significant hot water.

Choosing a Low-Flow Faucet

Large tubs benefit from adequate fill rate.

Ignoring Floor Load

Consider structural conditions in older or upper-floor bathrooms.

Using Harsh Cleaners

Acrylic requires non-abrasive care.

Positioning the Tub Too Close to the Wall

Leave enough room for cleaning and maintenance.

Who Is This Tub Best For?

The WOODBRIDGE 67-inch freestanding tub may be a strong choice for:

• Large primary bathrooms
• Homeowners who prioritize deep soaking
• Contemporary renovations
• Taller users who want more tub length
• Bathrooms with matte black hardware
• Buyers who prefer non-jetted tubs

It may be less suitable for:

• Small bathrooms
• Users with significant mobility limitations
• Homes with insufficient hot-water capacity

Advantages and Considerations

Advantages

• 67-inch overall length
• 14.75-inch soaking depth
• 64-gallon effective capacity
• LUCITE acrylic construction
• Fiberglass and resin reinforcement
• Double-wall insulation
• Curved contemporary profile
• Slip-resistant bottom
• Matte black pop-up drain included
• Matte black overflow included
• 1,000-pound listed support capacity
• Certification information provided

Potential Considerations

Requires substantial bathroom space.

Large water volume may challenge smaller water heaters.

Acrylic needs non-abrasive cleaning.

Tub filler must be purchased separately.

Professional plumbing installation is advisable.

Deep walls may be harder for some users to step over.

Certifications and Warranty

According to the supplied product information, the tub complies with:

CSA B45.5-17 / IAPMO Z124-2017

The manufacturer also lists a one-year limited warranty covering defects in material and workmanship.

Certification and warranty terms should be verified against the current documentation supplied with the exact model.

Frequently Asked Questions

What are the exterior dimensions?

Approximately 67 inches long x 31.5 inches wide x 23.625 inches high.

What are the interior dimensions?

Approximately 45.25 inches long x 19.625 inches wide.

How deep is the water?

The listed water depth to overflow is approximately 14.75 inches.

What is the tub capacity?

Approximately 64 gallons effective capacity.

What material is the bathtub made from?

High-gloss LUCITE acrylic reinforced with resin and fiberglass.

Is the bathtub double walled?

Yes.

Does the tub include a drain?

Yes. A matte black pop-up drain is included.

Is the overflow included?

Yes. A matte black overflow cover is included.

Is the faucet included?

No faucet is listed in the supplied package contents.

Is the bottom slip resistant?

Yes, according to the manufacturer's supplied specifications.

What is the listed load capacity?

The support structure is listed at up to 1,000 pounds.

Does this bathtub have jets?

No. This model is described as a soaking bathtub.

Does it come with a warranty?

The supplied description states a one-year limited warranty.

Final Thoughts

The WOODBRIDGE 67-inch acrylic freestanding bathtub is aimed at homeowners who want a large, deep soaking fixture with contemporary styling and straightforward non-jetted operation.

Its 14.75-inch soaking depth, 64-gallon capacity, curved interior profile, and 67-inch overall length make it particularly attractive for long baths and larger primary bathrooms. The double-wall acrylic construction adds insulation, while the reinforced shell and metal support frame provide structural strength without the extreme weight of cast iron.

The included matte black drain and overflow are also useful if the bathroom is being designed around black hardware.

Its main tradeoffs are size and water demand. This is a substantial tub that requires careful planning for bathroom clearance, floor loading, faucet flow, and hot-water capacity.

For buyers looking for a 67-inch freestanding acrylic soaking tub with deep water capacity, matte black drain hardware, double-wall insulation, and a modern curved design, the WOODBRIDGE B0057-MB offers a strong combination of comfort, appearance, and practical construction.