[Basic Parameters]---Output: 32KN; Stroke: 40mm/1.57inch; Crimping time: 3-4.5s; Battery Voltage/Capacity: 18V/5.0Ah; Charging voltage: AC100-240V 50-60HZ; Crimping range: 1/2’’-2’’ for stainless steel pipes, plastic pipes, copper pipes and aluminum plastic composite pipes. Include 6 press jaws: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2". G.W. 44lb; Single handheld tool: 12lb. [Powerful Pipe Crimping Tool]---This advanced electric hydraulic pipe crimping tool features an enhanced crimping force of 32 tons and a stroke length of up to 40mm. The powerful crimping force can complete the crimping work within 3-4.5 seconds, saving effort while greatly improving work efficiency. Each tool comes with 2pcs 5000mAh rechargeable batteries for convenient use, allowing you to swap batteries as needed. [Complete Crimping Kit]---Our pipe crimping tool is equipped with a complete set of dies, including 6 press jaws, 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", it effortlessly handles various sizes of pipes. The press jaws are precision thickened and reinforced with heat treatment technology to ensure long-term safe use. At the same time, the design of the fixed pin allows for easy die replacement and simple operation. [LED Display]---The press tool is equipped with an LED display screen, which can display the number of crimping times, battery level, maintenance reminders, and fault codes, helping to monitor the working status of the machine in real time. [Easy to Use]---This crimping tool is very easy to operate, with one click to turn on and off the machine. During the crimping process, pressure monitoring can be automatically performed, and it will reset automatically after crimping is completed. If an error occurs during the operation, the piston can be returned to its original position by manually pressing the reset button.