Lotus ATS-800 Bidet Seat Review: Warm Water Wash, Heated Seat, Turbo Mode and Air Dryer

An electronic bidet seat can add many of the comfort features of a full smart toilet without replacing the entire fixture. For homeowners who already have a reliable toilet, that can be a more practical and less disruptive upgrade.

The Lotus ATS-800 bidet seat combines warm-water cleansing, feminine and turbo wash modes, a heated seat, adjustable temperature controls, a warm-air dryer, a stainless-steel-encased self-cleaning nozzle, energy-saving operation, and a soft-close seat and lid. It is available in elongated and round configurations, with the elongated version measuring about 19.4 inches long by 18.6 inches wide.

The ATS-800 is also positioned as a straightforward DIY installation rather than a full plumbing project. It still requires access to water and a properly installed 120V GFCI electrical outlet, but the toilet bowl and flushing system remain unchanged.

For buyers who want a relatively traditional electronic bidet seat rather than an app-heavy or highly automated smart toilet, the Lotus ATS-800 offers a focused set of features centered on washing, warmth, drying, and ease of use.

What Is the Lotus ATS-800?

The Lotus ATS-800 is an electronic bidet toilet seat designed to replace the existing seat on a compatible toilet.

It connects to the toilet's water supply and uses electricity to provide warm-water cleansing, seat heating, drying, and electronic controls.

The elongated version is listed at approximately 19.4 x 18.6 inches and weighs about 11.9 pounds.

Lotus also offers a round version, so buyers should make sure they select the shape that matches their toilet.

Warm-Water Cleansing

One of the main reasons to choose an electric bidet over a basic attachment is warm water.

The ATS-800 provides temperature-controlled washing rather than relying only on cold supply water.

That can make the experience significantly more comfortable in winter or in homes where incoming water is naturally cold.

Warm-water control also lets different users choose a setting that feels comfortable rather than accepting one fixed temperature.

Rear Wash

The standard wash mode provides rear cleansing after toilet use.

This is the primary bidet function and will likely be the mode used most often.

Water-based cleansing can reduce dependence on dry toilet paper and provide a more refreshed feeling after use.

The exact pressure adjustment range is not specified in the supplied source, so buyers who want highly granular pressure control should verify the current manual or manufacturer specifications.

Feminine Wash

The feminine wash mode changes the spray position for more forward cleansing.

This makes the ATS-800 more versatile than a one-position bidet attachment.

Separate front and rear functions are useful in shared bathrooms because they accommodate different cleansing needs without requiring awkward repositioning.

Turbo Wash

The ATS-800 also includes a turbo wash mode.

This is intended to provide a stronger, more concentrated water stream than the standard wash.

Some users may prefer this for more forceful cleansing.

Others may find the normal setting more comfortable.

The important advantage is that the seat offers more than one wash intensity rather than forcing every user into the same experience.

Heated Toilet Seat

The built-in heated seat is one of the simplest but most noticeable comfort upgrades.

A cold toilet seat can be unpleasant during winter or in air-conditioned bathrooms.

The ATS-800 provides temperature control so users can choose a preferred level of warmth.

This makes the seat more useful year-round because the heater does not need to remain at one fixed setting.

Warm-Air Dryer

After cleansing, the ATS-800 uses a warm-air dryer.

The dryer can reduce how much toilet paper is needed after washing.

Some users may rely heavily on the dryer, while others may still prefer a small amount of paper afterward.

The realistic benefit is lower paper use rather than complete elimination for everyone.

Adjustable Dryer Temperature

The source describes temperature control for the air dryer.

That matters because maximum heat is not always the most comfortable choice.

A gentler setting may feel better for longer drying cycles, while warmer air may be more appealing in winter.

Giving users control over dryer temperature makes the feature more practical in a shared household.

Self-Cleaning Nozzle

The bidet nozzle includes a self-cleaning function.

This helps rinse the nozzle between uses and reduces residue buildup.

Because the spray wand operates within the toilet environment, automatic cleaning is an important hygiene feature.

It should still be inspected periodically, especially in hard-water areas where mineral deposits can affect spray performance.

Stainless-Steel-Encased Nozzle

Lotus describes the nozzle as being fully encased in stainless steel.

That is a useful durability feature.

Stainless steel resists corrosion and is generally easy to keep clean.

It also provides a more robust exterior than a fully plastic nozzle assembly.

The actual internal mechanism may still contain other materials, but the stainless outer construction is a practical design choice for a component exposed to frequent moisture.

Energy-Saving Mode

The ATS-800 includes an energy-saving mode intended to reduce unnecessary electricity use.

Electronic bidet seats consume power for heating water, warming the seat, drying, and standby operation.

An energy-saving mode can lower consumption when the toilet is not actively being used.

This is particularly useful in guest bathrooms or homes where the seat may sit idle for long periods during the day.

Why Energy-Saving Mode Matters

A bidet seat remains plugged in continuously.

That means standby efficiency can matter more than the brief energy used during a single wash.

Even if the exact savings are not specified, reducing unnecessary heating during idle periods is a sensible feature.

Soft-Close Seat and Lid

The ATS-800 includes a soft-closing seat and cover.

This prevents slamming and reduces noise.

It can also reduce repeated impact on the hinges over time.

Soft-close hardware is especially useful in shared bathrooms, ensuite spaces, or homes where nighttime noise matters.

Elongated and Round Versions

The ATS-800 is available in both elongated and round configurations.

That gives buyers more flexibility than products designed only for elongated bowls.

The key is choosing the correct version.

A round bidet seat will not fit an elongated toilet properly, and an elongated seat will not sit correctly on a round bowl.

How to Tell Which Shape You Need

An elongated toilet bowl has a longer oval profile.

A round bowl is shorter from the mounting bolts to the front edge.

Instead of relying only on appearance, measure the existing toilet and compare it with Lotus's fit specifications.

Also check mounting-hole spacing and clearance between the bowl and toilet tank.

Product Dimensions

The elongated ATS-800 is listed at approximately:

• 19.4 inches long
• 18.6 inches wide
• 11.9 pounds

Those measurements should be compared with the existing toilet before purchase.

Electronic bidet seats have larger rear housings than conventional seats, so tank clearance matters as much as bowl shape.

120V GFCI Outlet Required

The ATS-800 requires a 120-volt GFCI-protected outlet.

This is one of the most important installation requirements.

The seat needs electricity for water heating, seat heating, the dryer, and electronic controls.

If there is no suitable outlet near the toilet, electrical work may be required before installation.

Why GFCI Protection Matters

Bathrooms combine water and electricity, so ground-fault protection is important.

A GFCI is designed to interrupt power quickly if it detects an electrical imbalance that could indicate current leakage.

Installation should still comply with local electrical codes and the manufacturer's instructions.

Do not rely on a permanent extension cord as a substitute for a properly installed bathroom receptacle.

DIY Installation

The ATS-800 is marketed as easy to install.

For a compatible toilet with a functioning shutoff valve and nearby outlet, installation is generally much simpler than replacing the entire toilet.

The basic process usually involves removing the old seat, attaching the bidet mounting hardware, installing the water-supply adapter, connecting the hose, sliding the seat into place, and plugging it into power.

Do You Need a Plumber?

Not necessarily.

Many homeowners with basic DIY experience should be able to install an electronic bidet seat themselves.

Professional help may still be appropriate if the shutoff valve is corroded, the plumbing leaks, the fittings do not match, or a new electrical outlet is required.

A simple seat upgrade should not be used as an excuse to force questionable plumbing connections.

Check Water Connections Carefully

After installation, restore water pressure slowly and inspect all fittings.

Look around the shutoff valve, adapter, toilet tank hose, and bidet hose.

If a connection leaks, shut off the water and check the washer, alignment, and threads.

Do not assume that overtightening is the best solution.

Many fittings seal with rubber gaskets that can actually be damaged by excessive force.

Smart Bidet Seat vs. Basic Bidet Attachment

A basic non-electric bidet attachment is cheaper and simpler.

It needs no electrical outlet and has fewer components that can fail.

The ATS-800 adds substantial comfort:

• Warm-water washing
• Heated seat
• Warm-air drying
• Multiple wash modes
• Temperature control
• Energy-saving operation
• Self-cleaning nozzle

The tradeoff is higher cost and electrical dependence.

ATS-800 vs. Full Smart Toilet

A full smart toilet replaces the entire fixture and may add features such as automatic flushing, foot sensors, automatic lid opening, or specialized low-pressure flushing.

The ATS-800 leaves the existing bowl and tank in place.

That can be an advantage if the current toilet already flushes reliably and fits the bathroom properly.

It is also easier to replace a bidet seat in the future than an entire integrated smart toilet.

Does the ATS-800 Improve Toilet Flushing?

No.

Because the ATS-800 replaces only the seat, the toilet's existing flushing system remains unchanged.

If the toilet already has weak flushing or clogging problems, installing a bidet seat will not correct them.

The upgrade is focused on cleansing and comfort.

Cleaning the Seat

Use non-abrasive cleaning products suitable for electronic bathroom fixtures.

Avoid spraying excessive water directly into the electronic housing.

A soft cloth and mild cleaner are generally safer than harsh scrubbing products.

The nozzle should also be inspected periodically even though it has a self-cleaning cycle.

Hard-Water Maintenance

Hard water can leave mineral deposits around nozzle openings and inside water passages.

Over time, that may affect spray quality.

If your home has mineral-heavy water, check the manufacturer's cleaning or descaling recommendations.

Do not use aggressive acids unless they are explicitly approved.

Is the ATS-800 Good for Cold Climates?

Yes, this is one of the situations where its comfort features make the most sense.

The combination of heated seating, warm-water cleansing, and warm-air drying can make bathroom use more comfortable during winter.

The source also describes the seat as temperature controlled, giving users flexibility rather than one fixed heat setting.

Is It Good for a Primary Bathroom?

Probably.

A feature-rich bidet seat provides the most value when it is used frequently.

Warm water, seat heating, and drying become daily conveniences rather than occasional novelties.

For a rarely used guest bathroom, a simpler bidet attachment may be more economical.

Is It Good for Shared Bathrooms?

Yes.

Rear, feminine, and turbo wash modes provide different options for different users.

Temperature control also makes the seat easier to share.

The source does not mention user-memory presets, so settings may need to be adjusted manually between users depending on the exact control system.

Certification and Safety

The ATS-800 is described as cUL certified.

That is relevant for an electrical product used in a bathroom environment.

Certification can provide additional confidence that the product has been evaluated against applicable safety requirements.

It does not replace proper installation.

The seat still needs to be connected to the correct power supply and installed according to manufacturer instructions.

Two-Year Manufacturer Warranty

The supplied product information states that the ATS-800 includes a two-year manufacturer warranty.

That is useful for a product containing heaters, valves, sensors, electronics, and mechanical components.

Current warranty terms should be reviewed before purchase, including which parts are covered and how claims are handled.

Long-term parts availability is also worth considering for any electronic bidet.

Made in Korea

The ATS-800 is listed as made in Korea.

South Korea has a well-established electronic bidet market, and many bidet manufacturers produce advanced seats there.

Country of manufacture alone does not determine product quality, but some buyers may view it as relevant when comparing electronic bathroom fixtures.

Main Advantages

The ATS-800's strongest advantage is that it covers the core features most buyers expect from a premium bidet seat without relying heavily on app-based or highly automated controls.

Warm-water cleansing, feminine and turbo wash modes, a heated seat, adjustable temperature, warm-air drying, self-cleaning stainless-steel nozzle construction, soft-close operation, and energy-saving mode create a well-rounded feature set.

The availability of both round and elongated versions also improves compatibility.

Potential Drawbacks

The seat requires a nearby 120V GFCI outlet.

It adds electronic components that can eventually need service.

The dryer may not completely eliminate toilet paper use for every user.

The supplied information also does not specify detailed pressure levels, nozzle-position adjustments, or memory presets, so buyers who want highly granular customization may want to compare it with more advanced models.

Finally, because it is only a seat upgrade, it does nothing to improve the toilet's existing flushing system.

Who Should Consider the Lotus ATS-800?

The ATS-800 is a good fit for buyers who want a traditional premium electronic bidet experience without replacing the toilet.

It may be especially suitable for:

• Primary bathrooms
• Cold climates
• Users who want warm-water washing
• Buyers who prefer heated seating
• People trying to reduce toilet paper use
• Households wanting multiple wash modes
• Users who value stainless-steel nozzle construction
• Buyers who want a round or elongated version

Someone who only wants basic cold-water cleansing may be better served by a simpler non-electric attachment.

Frequently Asked Questions

Is the Lotus ATS-800 a full smart toilet?

No. It is an electronic bidet seat designed to install on a compatible existing toilet.

Is it available for elongated toilets?

Yes.

Is it available for round toilets?

Yes.

Does it provide warm-water cleansing?

Yes.

Does it have a rear wash?

Yes.

Does it have a feminine wash?

Yes.

Does it have a stronger wash mode?

Yes. A turbo wash mode is included.

Does it have a heated seat?

Yes.

Can the temperature be adjusted?

Yes. The source states that wash, seat, and dryer functions have temperature control.

Does it have a warm-air dryer?

Yes.

Can the dryer reduce toilet paper use?

Yes, potentially. The actual reduction depends on individual drying preferences.

Is the nozzle self-cleaning?

Yes.

What is the nozzle made from?

The nozzle is described as being fully encased in stainless steel.

Does the seat close softly?

Yes. Both the seat and cover use soft-close operation.

Does it have an energy-saving mode?

Yes.

Does it require electricity?

Yes.

What electrical outlet does it need?

A 120V GFCI outlet is required.

Can I install it myself?

Yes. The ATS-800 is designed for relatively easy DIY installation on a compatible toilet.

Does it improve flushing performance?

No. The existing toilet continues to handle flushing.

What certification does it have?

The product is described as cUL certified.

How long is the warranty?

The supplied information states a two-year manufacturer warranty.

Final Verdict

The Lotus ATS-800 electronic bidet seat is a practical option for buyers who want the core comforts of a premium bidet without moving into a full smart-toilet replacement.

Its strongest features are warm-water cleansing, feminine and turbo wash modes, a heated seat, temperature-controlled drying, a self-cleaning stainless-steel-encased nozzle, energy-saving mode, and soft-close operation.

The fact that Lotus offers both round and elongated versions also makes the ATS-800 easier to match to existing toilets.

The main installation requirement is a nearby 120V GFCI outlet, along with a compatible toilet and functioning water-supply connection.

For homeowners who already have a reliable toilet and want heated bidet cleansing, a warmer seat, drying, and straightforward electronic comfort features, the Lotus ATS-800 offers a balanced upgrade without the expense and complexity of replacing the entire toilet.